Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver for Sale
In modern, surround sound driven audio universe where home theater enthusiasts hear airplanes fly overhead and bombs exploding around them, one might think that mere Stereo is old fashioned. But don’t be mislead – humans have only two ears and stereo is still a significant life form.The case in point: the RX-4105. It’s actually an update of the market leading RX-4100/4103. Rated at 100 watts, Sherwood Electronic has reduced distortion significantly. It’s now less than 0.20% from 20 Hz to 20 kHz. The RX-4105 has a good AM/FM tuner with the ability to pre-set up to 30 favorite stations. It has inputs for 4 audio sources to accommodate your sound gear. And the sound is phenomenal – as you’d expect from a company that dates its own existence to before stereo’s birth.And the RX-4105 has at least one unexpected grace: the ability to independently select up to two sets of loudspeakers via the supplied remote control. (Audio purists will be pleased to know that this relay-controlled switching puts the speakers in parallel, maintaining their individual sound qualities.)
Product Details
- Total Discrete Amplifier stage for all channels
- 5 Audio Inputs (Including Tuner)
- Sleep Timer
- Bass and Treble control
- Measures 17.4 x 4.9 x 14 inches (W x H x D)
Sherwood’s incredibly affordable RX-4105 offers integrated preamplification and amplification, inputs for numerous audio source components, and advanced radio tuning and station access. The receiver delivers 100 watts RMS per channel x 2 for strong, clear sound across the audible spectrum–even at low listening levels. The company has lowered the amplifier’s distortion relative to the previous model (the RX-4105), to less than 0.08 percent, while also giving the receiver a new layout borrowed from its higher-end components.
The RX-4105 uses totally discrete amplifiers for all channels (TDAS) to maintain its high power and low distortion. Use the receiver’s A and B clip-type speaker outputs to power 2 different rooms, or to biwire a pair of speakers for more efficient amplification (with A outputs driving the woofers, for instance, and the B outputs driving the tweeters–make sure your speakers are compatible if this is a key feature for you).
The receiver also offers a handy 25-key remote control and switching for 2 pair of loudspeakers. Audio inputs switch between and amplify up to 4 additional components, including 2 requiring both inputs and outputs (such as a cassette deck and a VCR). The built-in AM/FM tuner features 30 station presets and auto station setup.
Other features include bass and treble tone controls, a dimmable fluorescent display, and a .25-inch headphone jack for private listening.
What’s in the Box
Sherwood RX-4105 receiver, remote control, AC power supply cord, FM indoor antenna, AM loop antenna set, and owner’s manual.
Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver Customer Review
I needed a small, basic, stereo Receiver to connect to my 46″ HD TV set, and which would fit in a small cabinet with less than six inches of vertical clearance.
Note the actual dimensions for this product:
W x H x D: 440mm x 138mm x 332 mm
W x H x D: 17-3/8 in x 5-7/16 in x 13 in
I paired this receiver with two Klipsch B-3 Synergy Bookshelf Loudspeakers, and the sound is excellent for an apartment. The actual room that I am using for this setup measures 17 ft, 2 in x 12 ft.
I had previously been using full size floor standing speakers, but their size did not go well with the decor of the TV set and the low profile, 13-1/2 inch high TV stand.
This receiver has very low distortion and it drives the Klipsch B-3 speakers extremely well. Granted, this is not a full-featured, surround-sound A/V receiver, and therefore does lack a few common features.
In particular, it lacks sub-woofer pre-out connections, digital audio inputs, a “Phono” input for LP turntables, and a “tape monitor” feature, which would be useful for connecting a graphic equalizer.
I was surprised to discover that unlike many other, more expensive receivers, this one has a decent headphone amplifier built in, which is only activated when the speakers are deactivated.
This receiver can drive my Sennheiser HD-580 headphones properly, which have an unusually high, 300 Ohm impedance rating. They sound better when powered by this receiver than they do when powered by some more expensive, dedicated headphone amplifiers.
For the nominal price, I am very happy with this receiver.
Highly recommended.
Best buy on “Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver”. You can Buy Cheap & Low Prices on Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver Discount. Read More Reviews and Buy Online – Fast & Easy.
★★★★ Find out more reviews! ★★★★
